Here's a complete guide on what to do if your AirPods keep pausing your music.
Every time your AirPods start to interrupt your music, there's a little bug that needs to be fixed.
This can be caused by the Bluetooth connection, the AirPods battery or incorrect settings in the dual tab and automatic ear detection settings.
Either way, intermittently interrupting your AirPods is not a problem and can be solved in no time.
Without wasting much time, let's go through the reasons and solutions to apply if your AirPods keep pausing.
Table of contents
Why are my Airpods on pause?
There are several reasons why your AirPods often stop working while you're using them.
1.Long range Bluetooth connection
This often happens when you are 10 to 18 meters away from your paired device or AirPods.
The music or video pauses intermittently to indicate that an object is interfering with the signal flow.
2.Faulty ear detection sensors
Automatic Ear Detection is a feature on iPhone devices that causes music to start playing when AirPods come into contact with your ears.
So if your music frequently stops while the AirPods are still in your ears, then the sensors are problematic.
3Delete a pod
Related to automatic ear-detection sensors, the sensor pauses your music when it detects a pod has been removed.
This is a feature enabled by the AirPods proximity sensor, but it can be turned off in the settings.
If there is a problem with the Bluetooth app on your device, you may experience the notch on your AirPods.
This problem is uncommon, but it also occurs when Bluetooth conflicts when you try to connect two audio devices at the same time.
The best way to fix this is to unpair and pair your AirPods with your device.
We can't overlook the fact that you might be streaming online content with a poor internet connection and regularly blame your AirPods.
Switch to a stable internet connection or better yet, find a good Wi-Fi connection to connect to.
6. Defecte Airpods-hardware
In one of our articles about why one ear of your AirPods is louder than the other, we discussed that the presence of liquids and frequent dropping of AirPods on hard surfaces can damage your AirPods.
If your AirPods regularly fall to the floor, there may be a connection jumper that triggers a double tap (pause).
7. Low battery on Airpods
If your AirPods are running low on battery, you will see regular pauses in your media to inform you that the battery is low.
Applying one or more of the above will permanently recover your AirPods from frequent breaks.
1. Charge the Airpods battery:
If your AirPods often stop running due to low battery, we recommend placing them in the charging case to charge.
You can also connect the housing to a power source when it is running low.
2.How to unpair and unpair Airpods
If the problem persists after charging your AirPods, consider removing the AirPods from the Bluetooth list and adding them again.
This can be done by pressing and holding the Bluetooth icon in the Control Center and then tapping "Iby closing and then removing the AirPods.
3. Disable the automatic ear detection sensor
If this sensor is faulty, you will still encounter this problem even after trying the solutions above.
You need to make sure your AirPods are connected to your iPhone device before you can disable the ear detection sensors.
- Go to Settings > Bluetooth
- Find Apple AirPods and tap "Iicon next to it.
- turn"Automatic ear recognition" settlement
You can now try using your AirPods and see if frequent pauses have been fixed.
4. Check your double-tap settings
Most AirPods set the double-tap action to pause playing media, but you may decide to reset it on your iPhone device.
Simply navigate to settings > Bluetooth > find the Bluetooth device and click "Iicon next to it.
Now you can decide what action you want the double tap to perform on your left and right AirPods.
However, this cannot be done on an Android device.
However, you should try not to press your AirPods against your skin to prevent your music from getting stuck.
5. Remove a pod
If the automatic ear detection feature is still active, your music will automatically stop when you remove a pod from your ear.
This has been put in place to ensure that your AirPods last longer and also in case of an emergency.
However, you can disable the automatic ear detection feature in the Bluetooth settings.
6. Reduce the range of Bluetooth
If you're too far away from your paired device or AirPods, try getting closer.
You can still completely disconnect and reconnect the device when you get closer to your AirPods.
7. Repair damaged AirPods
If your AirPods are faulty because they often fall to the floor, take them to Apple Support or a reputable mobile technician in your area for quick repair.
8. Use another app
The problem isn't just with our AirPods, it could also be caused by the streaming app you choose.
Most music streaming apps have long audio focus enabled, which interrupts the audio switching of another app or game.
Some streaming apps let you turn it off, while others set it to default.
You can try other streaming platforms and see if your music is still paused.
9. Reboot your device
Perform the reset operation to clear minor errors on your device.
You can now try testing AirPods and see if that fixes the problem.
10. Recoverable with Airpods
Also consider factory resetting your AirPods and then pairing them again.
This should solve the problem in most cases.
11. Disconnect Airpods from other devices
Your AirPods still pause when you try to automatically switch between an active device and a new device.
You can fix this by turning off Bluetooth on these devices, but if you need to use Bluetooth for another function, consider removing the AirPods from the device.
You can also disable the automatic switching feature on your AirPods.
12. Update your device's operating system
If you're running an outdated operating system, you may see cracks or breaks in your AirPods. Make sure to download updates for your device.
13. Contact Apple support
Finally, the last resort is to report your problem to Apple Support and they will help you look into it.
You can contact them through their website or by visiting an Apple Store near you.
14. Switch Airpods
You can ask for a replacement if it's under warranty, or just buy new AirPods from a store near you.
Why are my AirPods paused on Samsung?
One of the documented reasons why AirPods pause on Samsung devices is due to outdated firmware. You can try downloading an update for your Samsung device.
Other causes of frequent pauses on a Samsung device include;
- Low battery
- Bluetooth range
- Minor OS errors
- Bluetooth connection
- Accidentally pressing one of the Pods etc.
That is it.
Emphasis on the last point if you unconsciously lie on your AirPods while using them on your Samsung device.
It could activate the Bixby assistant and thus stop your music in most cases.
You can also change your choice of media player to avoid frequent pauses when the audio is playing in another program.
Frequently Asked Questions
Why do my AirPods pause Spotify?
If the automatic ear detection feature is active on your iPhone device, removing a pod from your ears will stop your Spotify music.
Also, make sure you are running the latest operating system on your device.
That is it.
Here are some causes and solutions that can be applied if your AirPods keep stopping randomly.
- AirPods Pro fall out? Try these free solutions
- How to Create a Verified PayPal Account in Nigeria
- Airpods not playing sound? Here's the solution
- Why does one of my Airpods make more noise than the other? 10 events
- How to Fix Airpods Not Connecting to MacBook
- Why can't people hear me on my AirPods?
Your AirPods won't pause music, podcasts, or any other apps if Automatic Ear Detection is turned off. If this trick isn't working, connect your AirPods to an iPhone or iPad and check the Bluetooth settings to enable this feature: Open the Settings app and go to Bluetooth. Tap the i button next to your AirPods.Why won t my AirPods pause when I double tap? ›
Your AirPods might have to be reset in order for Double-Tap to work again. If that doesn't help, contact Apple Support.Why my AirPods suddenly pause randomly? ›
Check AirPods Bluetooth range
If the distance is too much, it can cause audio transfer interruptions and pause randomly. In addition to distance, physical barriers such as walls or tables may also interfere with the connection. Sound wave overlaps or changes in amplitude can also contribute to the problem.
AirPods (3rd generation) controls
With the force sensor on the stem of both AirPods (3rd generation), you can do any of the following: Play and pause audio: Press the stem.
Unpair and Pair the AirPods Again
Sometimes, unpairing the AirPods from your iPhone and pairing them back can help fix simple issues like these. Give it a shot to see if it fixes the issue with AirPods gestures not working on your earbuds.
If you're paired to your iPhone and no update seems to be happening, put your AirPods earbuds back in their charging case, connect it to a power source, and re-pair the device to force an update. As long as your iOS device firmware is up to date, it shouldn't have any issue pulling down your AirPods firmware update.Why is my AirPod case flashing orange? ›
Blinking orange or amber
The status light flashes amber on your AirPods, indicating that the AirPods are experiencing a pairing error. This could be caused by several issues, like an incorrect pairing between your AirPods and the Device you're attempting to use them with, outdated firmware, or low battery levels.
While you can lock devices like your iPhone or Mac remotely with Lost Mode, you can't do the same with AirPods. That said, anyone can easily use stolen AirPods when they find them. Unfortunately, Apple Warranty or AppleCare+ do not cover lost and stolen AirPods.How long do AirPods last? ›
With multiple charges in your case, you get up to 30 hours of listening time,7 or up to 20 hours of talk time. Your AirPods (3rd generation) can get up to 6 hours of listening time (up to 5 hours with Spatial Audio enabled)9 or up to 4 hours of talk time on a single charge.How do I clean my AirPods? ›
Pull off the ear tips from each AirPod and rinse the ear tips with water. Don't use soap or other household cleaners. Wipe the ear tips with a soft, dry, lint-free cloth. Make sure that the ear tips are completely dry before reattaching to each AirPod.
AirPods might be pausing due to connection issues. You can try putting the AirPods in the case for about 20-25 seconds and then reconnecting them. You can also manually force the connection: Open the Control Center.What does pressing on AirPods do? ›
To play and pause audio, press the Touch control on the stem of an AirPod. To resume playback, press again. To skip forward, double-press the Touch control. To skip back, triple-press the Touch control.Are AirPods waterproof? ›
Your AirPods Pro (1st and 2nd generation), AirPods (3rd generation), MagSafe Charging Case for AirPods (3rd generation), Lightning Charging Case for AirPods (3rd generation), and MagSafe Charging Case for AirPods Pro (2nd generation) are water and sweat resistant, but they are not waterproof or sweatproof.Can you turn off AirPods sensor? ›
On iPhone, iPad, or iPod touch: Go to Settings , tap the name of your AirPods near the top of the screen, then turn Automatic Ear Detection on or off. On Mac: Choose Apple menu > System Settings, click the name of your AirPods in the sidebar (you may need to scroll down), then turn “Automatic ear detection” on or off.Can I make AirPods louder? ›
Change the volume of sound effects using iPhone or iPad
Wear your AirPods, and make sure they're connected to your device. On your iPhone or iPad, go to Settings > Accessibility > AirPods. Select your AirPods, then adjust Tone Volume.
Know who's calling without using your iPhone screen. Siri can announce calls in second-generation AirPods, AirPods Pro, AirPods Max, and Powerbeats Pro.Can I double tap AirPod pros? ›
Tap the More Info button next to your AirPods. Select the left or right AirPod to choose which AirPod you'd like to double-tap for Siri, playing or pausing audio content, or skipping between tracks.Do AirPods have built in microphone? ›
There's a microphone in each AirPod, so you can make phone calls and use Siri. By default, Microphone is set to Automatic, so that either of your AirPods can act as the microphone. If you're using only one AirPod, that AirPod will be the microphone.How do you skip songs on AirPods? ›
Hold the stem of the AirPods gently between your fingers, and squeeze the indented section twice. The track currently playing should skip forward to the next song. You can hold the force sensor on the second press to fast forward through the track currently playing.How do I turn on automatic ear detection? ›
- On a Pixel phone with Android 10+: Go to Settings. Bluetooth and tap the Settings icon by your paired Pixel Buds name. On other Android devices: Open the Google Pixel Buds app .
- Scroll down and tap More settings.
- Tap the toggle button to turn in-ear detection on or off.
Transparency mode lets outside sound in, so you can hear what's going on around you. Active Noise Cancellation and Transparency mode work best when your AirPods Pro fit well.Why do my AirPods hang up call when I touch them? ›
When adjusting your AirPods in your ear, where are you holding them? If you are grabbing them where the Force Sensor is and inadvertently press it, your AirPods Pro might believe you want to hang up a call.Do AirPods update themselves? ›
Firmware updates are delivered automatically while your AirPods are charging and in Bluetooth range of your iPhone, iPad, or Mac that's connected to Wi-Fi.What's the latest AirPod firmware? ›
Apple Releases New Firmware for AirPods Pro, AirPods, and AirPods Max. Apple today introduced new 5E135 firmware for the AirPods 2, the AirPods 3, the original AirPods Pro, the AirPods Pro 2, and the AirPods Max, up from the 5E133 firmware that was released in April.Can fake AirPods update firmware? ›
If the update still doesn't happen, it's possible that the AirPods are fake, because it's not possible to update fake AirPods. If your AirPods are real, but you still can't update them, I invite you to contact Apple support.Is it bad to keep opening and closing AirPods case? ›
When you charge your AirPods with charging case, you'll get the best, fastest results by using an iPhone or iPad USB charger or plugging into your Mac. Repeatedly opening and closing the charging case can reduce the battery charge of the case.Is it bad to keep charging AirPods? ›
Your AirPod case will simply stop the charging process once the battery is fully charged. This makes it safe to leave the case plugged into the lightning cable or on the Qi mat overnight. There will not be any consequences or overcharging.How far can you be from your phone with AirPods? ›
The AirPods Pro Bluetooth effective range oscillates between 20 and 50 feet (6 meters and 15 meters) Their Bluetooth 5.0 technology has a theoretical range of 131 feet indoors (40 meters) and up to 800 feet outdoors (240 meters) However, in practice, these values are decreased by real-life interferences: walls, poorly ...Can stolen AirPods be renamed? ›
You can change the name of your AirPods using your iPhone, iPad, iPod touch, or Mac. When you're signed in with the same Apple ID on multiple devices, the new name updates across devices. Wear your AirPods, and make sure they're connected to your device.Do AirPods have GPS tracking? ›
If you have AirPods Pro (2nd generation), you can find the precise location of each of your AirPods and the charging case. Open the Find My app on an iPhone or iPad that you previously paired with your AirPods. Tap Devices, tap the name of your AirPods, then tap Find.
Alternatively, you can go to Settings > AirPods. Tap the More Info button next to your AirPods. Select the left or right AirPod to choose which AirPod you'd like to double-tap for Siri, playing or pausing audio content, or skipping between tracks.Why do my AirPods disconnect and pause? ›
A lack of resources might be to blame for AirPods disconnects. It's also possible you've been sitting on updates for too long and you need to update your Bluetooth drivers on your phone or computer. Be sure to stay on top of updating your software to make sure this isn't an issue.How do I get my AirPods to pause when I take one out? ›
- Launch the Settings app on your iPhone or iPad. iOS Bluetooth settings.
- Tap on Bluetooth and then on the circled “i” icon next to your AirPods. “i” button beside AirPods.
- In the next screen, locate the Automatic Ear Detection function. Toggle on the switch.
- Make sure your AirPods are paired with an iPhone or iPad.
- Go into Settings > Bluetooth.
- Find your AirPods and tap the (i) next to it.
- Turn off Automatic Ear Detection.
Go to Settings > Bluetooth, then tap the Info button next to the name of your AirPods. Scroll down to the About section to find the firmware version. To use your Mac to check that your AirPods are up to date, make sure that you have the latest version of macOS.How do I fix my AirPods Pro settings? ›
On iPhone, iPad, or iPod touch: Go to Settings , tap the name of your AirPods near the top of the screen, then turn Automatic Ear Detection on or off. On Mac: Choose Apple menu > System Settings, click the name of your AirPods in the sidebar (you may need to scroll down), then turn “Automatic ear detection” on or off.Can you turn off auto pause on AirPods? ›
The feature is enabled by default, but if you want to you can manually disable it once you've connected the AirPods to an iPhone or iPad. Just note that once you do, you'll have to manually play/pause audio routing to the AirPods.Why does my right AirPod keep dying so fast? ›
It's possible that one of your AirPods isn't charging properly because the charging port — either on the AirPod itself or at the bottom of the charging case — is dirty, preventing it from charging properly. To fix that, clean your AirPods and case thoroughly and carefully.Can you ping AirPods? ›
You can play a sound on your AirPods to help you locate them if they're out of their case. If you have AirPods Pro (2nd generation), you can also play a sound on the charging case. On iPhone or iPad: Open the Find My app , tap Devices, tap the name of your AirPods, then tap Play Sound.Why do AirPods pause when touching? ›
If you're wondering why your AirPods keep pausing while they're still in your ears, there may be a problem with the sensors. You can disable this feature in your AirPods settings under Settings > Bluetooth. Tap on the Info (i) button next to your AirPods and toggle Automatic Ear Detection off.